Part Nº: C1044.

Form:  Flat Stick.

Quantity: Approx 570mm (22½")

Melting Point: 100°C.

Lead Free: NO

Flux: Dependent on metals being joined.

Constituents: Tin/Lead.

Usage: for use with Whitemetal - no tinning required to join whitemetal to brass

Technical Specifications

A High Quality Leaded Low Melting point solder.

To Avoid Fire do not drop hot solder onto combustible items.
Beware of Hot soldering irons and ancillery equipment.

Do NOT eat or drink whilst using and avoid Breathing Fumes.

Use in a well ventilated area.

Wash joint to remove residues at end of each session.

Wash Hands with soap and water after use.

Please Note: Not all colours are available in all sizes. 
Please see our disclaimer regarding colour and quantities below.

Part Nº: C1044.

Form: Stick or Rod.

Quantity: 35 grams approximately

Melting Point: 100°C.

Lead Free: NO

Flux: Dependent on metals being joined.

Constituents: Tin/Lead.

Usage: for use with Whitemetal - no tinning required to join whitemetal to brass

Technical Specifications

A High Quality Leaded Low Melting point solder.

To Avoid Fire do not drop hot solder onto combustible items.
Beware of Hot soldering irons and ancillery equipment.

Do NOT eat or drink whilst using and avoid Breathing Fumes.

Use in a well ventilated area.

Wash joint to remove residues at end of each session.

Wash Hands with soap and water after use.

Please Note: Not all colours are available in all sizes. 
Please see our disclaimer regarding colour and quantities below.

Part Nº: C1021 Red Flux

Form: Liquid.

Quantity: 250ml

Usage: Whitemetal, Brass, Nickel Silver and Pewter

This is an organic flux compound, which is very active at low temperature.  It is ideal for use with whitemetal, and is also suitable for other nonferrous metals.  It breaks down at around 240°C to leave non-corrosive residues. However, this should not be assumed and the joint should be rinsed or wiped with warm water.

Please Note: Not all colours are available in all sizes.
Please see our disclaimer regarding colour and quantities below.

Part Nº: C1020. Red Flux

Form: Liquid.

Quantity: 50ml

Usage: Whitemetal, Brass, Nickel Silver and Pewter

This is an organic flux compound, which is very active at low temperature.  It is ideal for use with whitemetal, and is also suitable for other nonferrous metals.  It breaks down at around 240°C to leave non-corrosive residues. However, this should not be assumed and the joint should be rinsed or wiped with warm water.

Please Note: Not all colours are available in all sizes.
Please see our disclaimer regarding colour and quantities below.