Part Nº: C1044.

Form: Stick or Rod.

Quantity: 35 grams approximately

Melting Point: 100°C.

Lead Free: NO

Flux: Dependent on metals being joined.

Constituents: Tin/Lead.

Usage: for use with Whitemetal - no tinning required to join whitemetal to brass

Technical Specifications

A High Quality Leaded Low Melting point solder.

To Avoid Fire do not drop hot solder onto combustible items.
Beware of Hot soldering irons and ancillery equipment.

Do NOT eat or drink whilst using and avoid Breathing Fumes.

Use in a well ventilated area.

Wash joint to remove residues at end of each session.

Wash Hands with soap and water after use.

Please Note: Not all colours are available in all sizes. 
Please see our disclaimer regarding colour and quantities below.

Part Nº: C1001.

Form: Stick or Rod

Quantity: 25 grams approximately

Melting Point: 70°C.

Lead Free: NO

Flux: Dependent on metals being joined.

Constituents: Tin/Lead.

Usage: For joining whitemetal castings. If used to fix casting to brass or nickel silver, tin the brass/nickel silver first using C1004 188°C solder

Technical Specifications

A High Quality Leaded Low Melting point solder.

To Avoid Fire do not drop hot solder onto combustible items.
Beware of Hot soldering irons and ancillery equipment.

Do NOT eat or drink whilst using and avoid Breathing Fumes.

Use in a well ventilated area.

Wash joint to remove residues at end of each session.

Wash Hands with soap and water after use.

Please Note: Not all colours are available in all sizes. 
Please see our disclaimer regarding colour and quantities below.

Solder Mask is a graphite type material that repels the flow of solder.
Its Primary use is for the assembly of Valve Gear, Linkages and Coupling Rods.
It dries when heat is applied to leave a solder repelling film that also acts as a long lasting dry lubricant.

Please Note: Not all colours are available in all sizes.
Please see our disclaimer regarding colour and quantities below.