3d Printed Seat Set for Kirk 7mm 61'6” Dia 186 Open Third

Designed specifically for use in Kirk 7mm Kits but could be used in other makes of coaches.

Scale: 43.5:1   7mm/1ft

Contents: Sixteen (16) pairs of seats - sufficient for the 8 bays in a Dia 186 Open Third

These represent the later style seats fitted to the Dia 186 Open Third replacing the Original Bucket style seats (7-30547).

Seat Sets may be supplied with support material attached (see second photo) this can be removed either by hand or with the point of a modelling knife to lift the support from the picture frames.

Colour: White or Light Beige

Please see our disclaimer regarding colour and quantities below.We recommend the use of Carr's Modelling Products solders and Pre Paint Cleaners, Etch Primers and Paint from Phoenix Precision Paints Ltd.
NOTE: Etches MAY have sharp edges. Castings MAY contain lead. Care should be taken when handling as we can not accept responsibility for damage to persons or property or illness caused by handling whitemetal castings.

DO NOT EAT OR DRINK WHILST HANDLING CASTINGS
 

Please Note: Not all colours are available in all sizes.
Please see our disclaimer regarding colour and quantities below