The Standard 8' 6" Gresley Bogie.

Scale: 4mm:1ft (OO, EM, S4)

As now supplied in the ExKirk LNER coach kits

Quantity: Either:    One (1) Bogie Mouldings as picture above. -
                                         Sufficient to produce One (1) Bogie.
                                                Supplied with Bearings                              
                              Two (2 Bogie Mouldings as picture above. -
                                         Sufficient to produce Two (2) Bogies [1 coach].
                                                Supplied with Bearings
                              Ten (10) Bogie Mouldings as picture above. -
                                         Sufficient to produce Ten (10) Bogies [5 coaches].
                                                Mouldings ONLY, Bearings are available Here.

Each Moulding contains two sides, one stretcher, front and rear stretcher, axlebox covers, brake blocks, step boards, NEM coupler pockets and fixing lug.
Now supplied with a seperate stretcher plate, and instructions, to convert this bogie to fit the ExKirk kits without any modification to the coach.

Suitable for either screw or glue assembly. Supplied with full instructions. 

Injection Moulded Polystyrene

Colour: Pewter (colour may vary)

Parts will require removal from sprues and some trimming of flash may be required.

Edges MAY be sharp and care should be taken when handling.

Extreme Care should be taken when handling sharp knives.

We recommend the use of adhesives from either Carr's Modelling Products or Phoenix Precision Paints Ltd and Paint from Phoenix Precision Paints Ltd.

Care should be taken when handling as we can not accept responsibility for damage to persons or property or caused by handling parts or from knives or adhesives used in the assembly of this kit.

  4MM506