Iso Propanol
(Isopropyl Alcohol) [Rubbing Alcohol]
Please Note: Not all colours are available in all sizes. Please see our disclaimer regarding colour and quantities below.
General Purpose Thinners.
For brushing enamels and varnishes and general equipment cleaning.
Not suitable for final cleaning of parts prior to painting. Use PQ17 (or PQ21 Superclean) or PQ19 Pre Paint Cleaners,
.
Pre Paint Cleaner.
For cleaning [degreasing] metal parts & kits prior to painting.
Application can either be by dipping the parts, or by application with a paint brush or clean lint free rag.
If application is by brush or rag you will need to do the job at least three (3) times to ensure that the grease has been killed and removed properly.
If dipping, use a brush to help remove the grease.
Do not touch the cleaned surface with bare fingers after cleaning.
Beware of soldered or brazed joints, seams etc where capillary action can suck the cleaner into the joint. If this happens it will prove almost impossible to get out until you start to paint, when capillary action will work in reverse and destroy the paint.
Quick Air Drying Thinners.
For spraying Precision and Cherry enamels.
DO NOT use to spray Varnishes - see PQ10
Varnish Thinners.
for thinning & Spraying Precision Paints Varnishes.
Whilst varnish is essentially the same as paint, the inherent differences cause problems that do not appear with coloured paints.
The most particular of these differences is that varnish MUST be applied in a very fine coat and allowed to dry slowly. DO NOT FORCE DRY VARNISH
PQ10 Varnish Thinners is a specially formulated slow drying thinner designed for use with All Precision Varnishes.
PV62, PV72, PV82 & PV92 standard varnishes can be thinned UP TO 50%.
PAV62, PAV72 & PAV82 Ready Thinned Varnishes can be thinned by about another 10 - 20% IF required.