Pre Paint Multi Surface Cleaner.
For cleaning [degreasing] plastic parts & kits prior to painting.
Application can either be by dipping the parts, or by application with a paint brush or clean lint free rag.
If application is by brush or rag you will need to do the job at least three (3) times to ensure that the grease has been killed and removed properly.
If dipping, use a brush to help remove the grease.
Do not touch the cleaned surface with bare fingers after cleaning.
Beware of soldered or brazed joints, seams etc where capillary action can suck the cleaner into the joint. If this happens it will prove almost impossible to get out until you start to paint, when capillary action will work in reverse and destroy the paint.
Please Note: Not all colours are available in all sizes.
Please see our disclaimer regarding colour and quantities below.