Gloss Varnish - ready thinned for airbrushing As supplied, a high quality synthetic (oil based) spraying enamel Varnish.

Stir thoroughly with a spatula (lollipop stick, wooden coffee stirer etc.) for a minimum of 5-10 minutes, or a power stirer. Ensure that you get into the bottom corners of the can and bring any sediment to the surface and stir in.

May be further thinned, if required, using PQ10 Varnish Thinners.

This product is best sprayed at a temperature of below 10° Centigrade ( 50°F). and left for a Minimum of 24 - 48 hours to dry before any overcoating or further actions are taken.

Apply One VERY VERY thin coat and leave to dry thoroughly. Apply a second VERY VERY thin coat if required

Please Note: Not all colours are available in all sizes.
Please see our disclaimer regarding colour and quantities below.

Matt Varnish As supplied, a high quality synthetic (oil based) brushing enamel Varnish.

Stir thoroughly with a spatula (lollipop stick, wooden coffee stirer etc.) for a minimum of 5-10 minutes, or a power stirer. Ensure that you get into the bottom corners of the can and bring any sediment to the surface and stir in.

May be thined, if required, for brushing using PQ10 Varnish Thinners.

For spraying, thin to approximately 80% paint:20% PQ10 and spray from between 75 - 100mm (3-4 inches) at a pressure of about 2 bar (30 p.s.i.).

Matt varnish may require more thinning.

This product is best brushed or sprayed at a temperature of below 10° Centigrade ( 50°F). and left for a Minimum of 24 - 48 hours to dry before any overcoating or further actions are taken.

Apply One VERY VERY thin coat and leave to dry thoroughly. Apply a second VERY VERY thin coat if required

Please Note: Not all colours are available in all sizes.
Please see our disclaimer regarding colour and quantities below.

Satin Varnish - ready thinned for airbrushing As supplied, a high quality synthetic (oil based) spraying enamel Varnish.

Stir thoroughly with a spatula (lollipop stick, wooden coffee stirer etc.) for a minimum of 5-10 minutes, or a power stirer. Ensure that you get into the bottom corners of the can and bring any sediment to the surface and stir in.

May be further thinned, if required, using PQ10 Varnish Thinners.

This product is best sprayed at a temperature of below 10° Centigrade ( 50°F). and left for a Minimum of 24 - 48 hours to dry before any overcoating or further actions are taken.

Apply One VERY VERY thin coat and leave to dry thoroughly. Apply a second VERY VERY thin coat if required

Please Note: Not all colours are available in all sizes.
Please see our disclaimer regarding colour and quantities below.