Please Note: Not all colours are available in all sizes.
Please see our disclaimer regarding colour and quantities below.

The Bob Moore’s Master Lining Pen evolved from the need to be able to line a model more easily than with a brush or bowpen, as these methods, in the hands of an amateur, did not give consistent results. 

After some trials a pen was developed which would do the required job. 

This was tried out by a number of modellers, who had no previous experience of lining, with excellent results.

Each set contains one handle with a ball jointed head socket. The pen head which incorporates a small reservoir for the paint (one spot of paint will produce 30” to 60” of line). Two Guides and full instructions. 

Also included is a test plate which has been lined using the actual pen head included in the set. Each pen is individually tested before it is packed.

The Bob Moore’s Master Lining Pen evolved from the need to be able to line a model more easily than with a brush or bowpen, as these methods, in the hands of an amateur, did not give consistent results. 

After some trials a pen was developed which would do the required job. 

This was tried out by a number of modellers, who had no previous experience of lining, with excellent results.

Each set contains one handle with a ball jointed head socket. The pen head which incorporates a small reservoir for the paint (one spot of paint will produce 30” to 60” of line). Two Guides and full instructions. 

Also included is a test plate which has been lined using the actual pen head included in the set. Each pen is individually tested before it is packed.

Lining Gold for use with a Bob Moore Pen.

Owing to the high Quantity of metal particles in our standard Lining Gold it is not suitable for use in a 'Bob Moore' pen.

This is because the metal particles block the knib and stop the pen working. 

Apply a small drop of neat paint into the reservior on the knib.

If required may be thinned using a small drop of lighter fuel. 

As supplied, a high quality synthetic (oil based) brushing enamel paint.

Stir thoroughly with a spatula (lollipop stick, wooden coffee stirer etc.) for a minimum of 5-10 minutes, or a power stirer. Ensure that you get into the bottom corners of the can and bring any sediment to the surface and stir in.



This Product Contains LEAD.

Please Note: Not all colours are available in all sizes.
Please see our disclaimer regarding colour and quantities below.