Spare Floor Moulding for our Southern Coach Kits

Scale: 4mm:1ft (OO, EM, S4)

Quantity: One (1) Floor as per picture above.
(Please Note: The picture shows both the front and the back of the moulding. ONLY ONE moulding is supplied not two)

Injection Moulded Polystyrene Coach side

Colour: Varies and parts may be multi coloured

These Floors are from brand new tooling to the same dimensions as the original Ian Kirk floor. Due to some mistakes during the manufacture of the tool a few simple to correct errors have been made. These are shown on the picture above ringed in red. At each corner the cross brace needs to be cleaned away so that the solebars will sit flush to the floor and tight between the ends and in the middle the pip needs to be cut away so that the brake cylinder can sit onto its mounting.

Parts will require removal from sprues and some trimming of flash may be required.

Edges MAY be sharp and care should be taken when handling.

Extreme Care should be taken when handling sharp knives.

We recommend the use of adhesives from either Carr's Modelling Products or Phoenix Precision Paints Ltd and Paint from Phoenix Precision Paints Ltd.

Care should be taken when handling as we can not accept responsibility for damage to persons or property or caused by handling parts or from knives or adhesives used in the assembly of this kit.