250ml Satin Black
Cans are covered in Satin Black Paint - All lids are secure and contents are OK.
From time to time we have accidents and tins either get bent or damaged or they get covered in paint.
When this happens they cannot be sold as 'new' and will therefore be sold here.
There are three major categories of can:-
A Damaged or crushed in some way
B Paint Covering over most of the can or lumps of solid paint where the can has sat in spilt paint whilst it dries
C Congealed paint around the lip or in the lid where a small amount of paint has seeped from a crack and dried - preserving the remainder of the contents
Technical Specifications
As supplied, a high quality synthetic (oil based) brushing enamel paint.
Stir thoroughly with a spatula (lollipop stick, wooden coffee stirer etc.) for a minimum of 5-10 minutes, or a power stirer. Ensure that you get into the bottom corners of the can and bring any sediment to the surface and stir in.
May be thined, if required, for brushing using PQ8 General Purpose Thinners.
For spraying, thin to approximately 80% paint:20% PQ9 Quick Air Drying Thinners and spray from between 75 - 100mm (3-4 inches) at a pressure of about 2 bar (30 p.s.i.).
Matt colours may require more thinning.
This product is best brushed or sprayed at a temperature of below 10° Centigrade ( 50°F). and left for a Minimum of 24 - 48 hours to dry before any overcoating or further actions are taken.
Apply over the top of a properly primed surface.