Carr's Hot Tape has been designed to hold parts together during soldering or whilst they are exposed to high 
temperatures.

It is ideal for holding etched components together whilst soldering and it also has high electrical insulation properties.

Hot Tape can be used at temperatures of up to 300°C for prolonged periods or up to 400°C for short term use, as when soft soldering. It is quite suitable for use with Carr's 243°C High Temperature solder.
 
Hot Tape will start to char and disintegrate at about 750°C.

Width: 12mm (1/2")

Length: 2 metres (6' 6") approx

Please Note: Not all colours are available in all sizes.
Please see our disclaimer regarding colour and quantities below.

Part Nº: C1028.  Orange Flux

Form: Liquid.

Quantity: 50ml

Usage: Electrical

A non-corrosive flux, which should be used for jobs that cannot be washed, such as gearbox casings, track laying, and electrical wiring.  This flux is compatible with speedy solder.  It is ideal for wiring repairs where adequate solder is already present.  The residues should be cleaned off with Cleaner Degreaser if it is intended to paint over the joint.

Please Note: Not all colours are available in all sizes.
Please see our disclaimer regarding colour and quantities below.

Solder Mask is a graphite type material that repels the flow of solder.
Its Primary use is for the assembly of Valve Gear, Linkages and Coupling Rods.
It dries when heat is applied to leave a solder repelling film that also acts as a long lasting dry lubricant.

Please Note: Not all colours are available in all sizes.
Please see our disclaimer regarding colour and quantities below.