Information and Advice for Soldering and using Carr’s Products.

An A4 booklet containing information and advice on all of the products we supply.

Contains instructions for metal blacking amongst other things

2019 edition, updated to bring it in line with international regulations

Please Note: Not all colours are available in all sizes.
Please see our disclaimer regarding colour and quantities below.

Carr's Hot Tape has been designed to hold parts together during soldering or whilst they are exposed to high 
temperatures.

It is ideal for holding etched components together whilst soldering and it also has high electrical insulation properties.

Hot Tape can be used at temperatures of up to 300°C for prolonged periods or up to 400°C for short term use, as when soft soldering. It is quite suitable for use with Carr's 243°C High Temperature solder.
 
Hot Tape will start to char and disintegrate at about 750°C.

Width: 12mm (1/2")

Length: 2 metres (6' 6") approx

Please Note: Not all colours are available in all sizes.
Please see our disclaimer regarding colour and quantities below.

Solder Mask is a graphite type material that repels the flow of solder.
Its Primary use is for the assembly of Valve Gear, Linkages and Coupling Rods.
It dries when heat is applied to leave a solder repelling film that also acts as a long lasting dry lubricant.

Please Note: Not all colours are available in all sizes.
Please see our disclaimer regarding colour and quantities below.