This item is generally available at all exhibitions and by mail order, although not all sizes may be carried. As many items are only carried in very limited quantities it is advisable to order items for collection either by using the click and collect option on the website, or by phone and giving a minimum of two weeks notice.

7-40019

WRK020 LNWR Early 24 ft 1st/2nd Composite Coach

Price: £0.00
In stock: No items in stock

Product information

LNWR Early 24 ft 1st/2nd Composite Coach

Manufacturer:

White Rabbit Kits

7-40019

WRK020 LNWR Early 24 ft 1st/2nd Composite Coach

This Kit contains instructions that have yet to be rewritten. As such they will be very basic and MAY be difficult to understand.

We do not recommend this kit in its current state if you are a novice kitbuilder.

By checking this box you are stating you have read and understand the above

£0.00

Qty:

Out of stock

Specifications

Scale: 7mm:1foot ('O' Gauge / Scaleseven)

Material: Etched Brass & White Metal

Additional Parts Required:-

Solder. - Carr's C1002 (183°), C1004 (145°)
& C1001 (70°)

flux. - Carr's C1020 (Red) or
C1026 (Yellow)

paint. -

transfers. -

wheels. - Mansell or 10 Spoke Van
[Slaters 7124G or 7131](other wheels are available)

We recommend the use of Carr's Model Products solders and Pre Paint Cleaners, Etch Primers and Paints from Phoenix Precision Paints Ltd.

Etches MAY have sharp edges. Castings MAY contain lead.
Care should be taken when handling as we can not accept responsibility for damage to persons or property or illness caused by handling either etches or whitemetal castings.

DO NOT EAT OR DRINK WHILST HANDLING CASTINGS

Associated Items

About Etch Primers

Application of Precision Paints and Temperature.

Coach Plum

LNWR / L&Y Coach Plum

Technical Specifications

As supplied, a high quality synthetic (oil based) brushing enamel paint.

Stir thoroughly with a spatula (lollipop stick, wooden coffee stirer etc.) for a minimum of 5-10 minutes, or a power stirer. Ensure that you get into the bottom corners of the can and bring any sediment to the surface and stir in.

May be thined, if required, for brushing using PQ8 General Purpose Thinners.

For spraying, thin to approximately 80% paint:20% PQ9 Quick Air Drying Thinners and spray from between 75 - 100mm (3-4 inches) at a pressure of about 2 bar (30 p.s.i.).

Matt colours may require more thinning.

This product is best brushed or sprayed at a temperature of below 10° Centigrade ( 50°F). and left for a Minimum of 24 - 48 hours to dry before any overcoating or further actions are taken.

Apply over the top of a properly primed surface.

Please Note: Not all colours are available in all sizes.
Please see our disclaimer regarding colour and quantities below.

From £4.75

Coach White

L.N.W.R. Coach 'White'

Technical Specifications

As supplied, a high quality synthetic (oil based) brushing enamel paint.

Stir thoroughly with a spatula (lollipop stick, wooden coffee stirer etc.) for a minimum of 5-10 minutes, or a power stirer. Ensure that you get into the bottom corners of the can and bring any sediment to the surface and stir in.

May be thined, if required, for brushing using PQ8 General Purpose Thinners.

For spraying, thin to approximately 80% paint:20% PQ9 Quick Air Drying Thinners and spray from between 75 - 100mm (3-4 inches) at a pressure of about 2 bar (30 p.s.i.).

Matt colours may require more thinning.

This product is best brushed or sprayed at a temperature of below 10° Centigrade ( 50°F). and left for a Minimum of 24 - 48 hours to dry before any overcoating or further actions are taken.

Apply over the top of a properly primed surface

Please Note: Not all colours are available in all sizes.
Please see our disclaimer regarding colour and quantities below.

From £4.75

L.N.W.R. Coach Lining Tan

L.N.W.R. Coach Lining Tan

Technical Specifications

As supplied, a high quality synthetic (oil based) brushing enamel paint.

Stir thoroughly with a spatula (lollipop stick, wooden coffee stirer etc.) for a minimum of 5-10 minutes, or a power stirer. Ensure that you get into the bottom corners of the can and bring any sediment to the surface and stir in.

May be thined, if required, for brushing using PQ8 General Purpose Thinners.

For spraying, thin to approximately 80% paint:20% PQ9 Quick Air Drying Thinners and spray from between 75 - 100mm (3-4 inches) at a pressure of about 2 bar (30 p.s.i.).

Matt colours may require more thinning.

This product is best brushed or sprayed at a temperature of below 10° Centigrade ( 50°F). and left for a Minimum of 24 - 48 hours to dry before any overcoating or further actions are taken.

Apply over the top of a properly primed surface.

Please Note: Not all colours are available in all sizes.
Please see our disclaimer regarding colour and quantities below.