Drummond Standard Locomotive Buffers

As adopted by all of the railways where either of the Drummonds were Chief Mechanical Engineer
Including the London South Western (LSWR), Highland (HR), Caledonian (CR) & Glasgow & South Western (GSWR).

Scale: 4mm:ft  Turned Brass and Steel

Quantity: Four (4)

Turned Brass Bodies with the  Heads and Shanks turned in steel for strength. Supplied with springs and assembly instructions.

Requires : Solder (adhesive) and Paint.


Please see our disclaimer regarding colour and quantities below.We recommend the use of either Churchward Models or Carr's Modelling Products solders and Pre Paint Cleaners, Etch Primers and Paint from Phoenix Precision Paints Ltd.
NOTE:Etches MAY have sharp edges. Castings MAY contain lead. Care should be taken when handling as we can not accept responsibility for damage to persons or property or illness caused by handling whitemetal castings.

DO NOT EAT OR DRINK WHILST HANDLING CASTINGS
 

Please Note: Not all colours are available in all sizes.
Please see our disclaimer regarding colour and quantities below