|
|
|
Badger 200-3 Airbrush Set (new design)
Spray pattern is adjustable from 1/8" to 1.1/2". Set includes airbrush, mixing bottles, vinyl hose and gas canister allowing you to start spraying straight away. For more serious spraying we strongly recommend that one of the compressors listed below is considered. Finish and convenience are dramatically enhanced. |
|
£69.99 |
|
Badger Braided Airbrush Hose
Although the vinyl hose is quite suitable for use with a compressor, it has a pressure limit or around 40psi and is not recommended for heavy duty use. Where sustained high pressure (45-50 psi) is anticipated, the braided hose is recommended. The hose is fitted with standard Badger connectors at each end with the addition of a 1/4" BSP null at one end. |
|
£20.45 |
|
Badger Paint Mixer
A battery operated paint mixer which thoroughly mixes the paint in the tim without throwing paint everywhere! Requires 2 x AA batteries. |
|
£13.20 |
|
Badger Heavy Nozzle and Needle Set
Gives 1/8" to 2" spray pattern. This set is only suitable for fitting to the old style Badger 200-3 air brushes. |
|
P.O.A |
|
Badger 3/4oz Bottle with Cap
Suitable for mixing and fits onto airbrush. |
|
£0.80 |
|
Badger 2oz Bottle with Cap
Suitable for mixing and fits onto airbrush. |
|
£2.25 |
|
Badger Compressor Adaptor
Without bleed hole for compressors with reservoirs. 1/4" BSP female to Badger hose thread. |
|
£4.60 |
|
Badger Teflon Head Washer
For Badger models 100, 150 & 200.
Not required
for models 155, 175, 200NH (200-3), 250, 260, 350 or 360. |
|
£2.05 |
|
Badger Jar Adaptor
Complete with diptube and cork gasket. |
|
£4.85 |
|
Fittings Kit
Badger hose connector plus 1/4" BSP adaptor to fit to Water Trap/Filter unit etc. |
|
£5.95 |
|
Kite Miniature Gravity Feed Spray Gun
This superb miniature spray gun is ideal for 5" gauge locos and above. Adjustable from cone to fan pattern! Air consumption is 3cfm so is well suited for use with the 7.0cfm compressor listed below and right. It is NOT suitable for use with the Ultra Quiet Compressor. Made in Italy. |
|
£82.00 |
|
Hose Coil
5 metre hose coil fitted with a 1/4" BSP female swivel fitting at each end. This is a special, highly flexible hose for connecting a spray gun to a compressor. Ideal for the Kite. |
|
£15.30 |
|
ABAC Vento oil-free compressor
7 CFM. Max pressure 115p.s.i.
6 litre reservoir
Auto on/off switch holds tank pressure between 80 and 115 p.s.i. Fitted with simple graduated pressure regulator.
240v A.C. 1.5 h.p. motor.
1/4” B.S.P. male outlet.
Suitable for airbrushes, fullsize spray guns or running model steam locomotives on air for setting-up valve gear etc.
Options:
Industrial quality filter/watertrap complete with pressure regulator and outlet pressure gauge. Essential for spraying with airbrush or spray gun as ALL compressors start to generate water after about 20 minutes running.
Made in Italy. |
|
P.O.A. |
|
ABAC Vento Option 2
Compressor as described above but including an industrial quality watertrap/filter/regulator and gauge.
| |
P.O.A. |
ABAC Vento Option 3
As Option 2 above but including a Badger 200-3 Airbrush set.
| |
P.O.A. |
ABAC Vento Option 4
As Option 2 above but including a Kite Mini Spray Gun and Air Hose.
| |
P.O.A. |
|
ABAC 2/9 ultra quiet compressor
0.8 CFM. Max pressure 115p.s.i.
9 litre reservoir
Auto on/off switch holds tank pressure between 80 and 115 p.s.i.
240v A.C.ultra quiet compressor and motor.
1/4” B.S.P. female outlet.
This compressor is supplied with filter/watertrap complete with integral pressure regulator and outlet pressure gauge.
Ideal for use with airbrushes.
Not suitable for use with the Kite spraygun.
This compressor does not have sufficient air volume output to run a loco on air.
Made in Italy. |
|
P.O.A. |
|
Compressor Oil
For use with the Ultra Quiet compressor only. This is a maintenance item only. The Ultra Quiet Compressor is supplied filled with oil ready to operate. |
|
P.O.A. |
|
Combined Filter/Pressure Regulator/Water Trap
Miniature unit suitable for use with an airbrush, or with a 'touch-up' gun. 1/8" BSP female threads.
Supplied with a Pressure Gauge |
|
£45.00 |
|
SprayBooth
Fan Assisted - by Widespread Solutions Ltd. This item is delivered carriage free direct from the manufacturer. |
|
£269.99 |
|
SprayBooth Filter
Spare IFA3 filter for the above unit. Postage £5.50 or reserve and collect at an exhibition |
|
£17.95 |
.jpg)
